HDMI なしでテレビをホーム レシーバーに接続する方法 - ガイドと図
オーディオ システムからテレビやケーブル ボックスの優れたサウンドを楽しみたいのに、レシーバーに HDMI ポートがありませんか?朗報です。他にも方法があります。
この記事では、たくさんの素晴らしい情報を見つけることができます:
- HDMI なしでテレビを受信機に接続する方法
- 方法を示す明確で役立つ図
- サラウンド サウンドで機能するものと機能しないもの
- 最高の結果を得るのに役立つ情報
- ..さらに!
最初に知っておくべき接続とケーブルのオプション
必要なケーブルは、受信機の利用可能な入力と、使用する必要があるコンバーター (存在する場合) によって異なります。 TV 用のオーディオ出力ジャックの標準セットはないため、1 つまたは複数の組み合わせである可能性があります。
受信機には、同軸デジタル入力、光デジタル入力、または補助 (「AUX」) 入力など、少なくとも 1 種類の非 HDMI 入力があることが重要です。 (これらについては、後で詳しく説明します)
HDMI に加えて、テレビには次のものがある場合があります。
- RCA ジャック: アナログとも呼ばれます オーディオは非デジタルであり、受信機によって直接増幅できるため、信号出力。 RCA オーディオ ケーブルの使用は安価で簡単です。一部のテレビには、3.5mm (1/8 インチ) ヘッドフォン ジャック スタイルのコネクタがあります。これらには、3.5mm から RCA へのアダプター ケーブルを使用できます。
- 光デジタル出力: TOSLINK ジャックとも呼ばれる、これはデジタル オーディオ出力であり、ある時点でアナログ信号に戻す必要があります。光ケーブルを差し込んで、このタイプの入力を備えた受信機に接続できます。信号は、電気ビットの代わりに光のパルスを使用して運ばれます。
- 同軸デジタル出力: これは、RCA ケーブルに接続する 1 つの RCA スタイルのジャックを使用して、電気ビットを使用してデジタル オーディオ信号を伝送します。 できないことに注意してください 受信機のアナログ RCA AUX 入力に接続します。
上記のコネクタは、標準テレビとスマート TV の両方に適用されます。常に特定のモデルによって異なります。
HDMI と HDMI ARC の説明
High Definition Multimedia Interface (HDMI) 規格は、約 15 年前から家電市場に出回っています。少し進化し、より柔軟になりました。残念ながら、時々理解するのが少し複雑です.
簡単な説明は次のとおりです。
- 元の (古い) HDMI 規格では、ビデオは伝送されましたが、オーディオは外部デバイスに伝送されませんでした
- The ARC (Audio Return Channel) standard was created to allow you to carry sound and video in one cable. Introduced in HDMI 1.4 version, it’s been around a while. HDMI ARC can carry up to 5.1 surround sound.
- HDMI eARC is essentially an upgrade of the ARC standard and can carry up to 7.1 surround sound or high-quality digital audio for music, along with a few other minor advantages.
The good news is that since HDMI ARC has been around since 2009 it’s most likely what kind of output your TV or other devices have. It also means you’ll have a great option for a receiver/home theater system without an HDMI input jack as you’ll see.
As you see later, an HDMI audio extractor (adapter) will make getting sound possible – and it’s affordable, too.
Digital vs analog audio jacks explained
Digital outputs work by transmitting audio represented in digital format made up of bits of information. Newer AV receivers with these types of inputs can decode the digital signal back to sound and amplify it to drive speakers.
An older receiver or a standard home stereo amplifier cannot and you’ll likely need a digital to analog (RCA) converter box to do the job, as they provide an RCA compatible output pair.
Analog jacks are a non-digital output that can be amplified to drive speakers by any compatible receiver or amp with auxiliary, DVD, or CD inputs. You can also use self-powered speakers with analog outputs.
How to connect a TV to a receiver without HDMI
The type of connection you’ll need will depend on your particular TV. Older receivers often have auxiliary (AUX) RCA input jacks with one or more labels:
- AUX in
- DVD in
- CD in
Input jacks like these were used years ago playing audio from a separate audio source through the receiver and will work fine for TV sound with the right connection. (You can also connect sound from an external media player or Blu Ray player for example if you like.)
They’re the same thing as both accept a low-level signal (line level) signal to be amplified by the receiver in the right mode and sent to the speakers.
DIAGRAM – TV to receiver connection options
As I mentioned earlier, there are two main types of TV sound connections you’ll use:
<オール>1. Using an HDMI converter (HDMI to RCA adapter, HDMI to digital adapter)
An HDMI audio extractor is a device that removes the digital sound source from an HDMI output or other device and provides digital or analog outputs. Plug in the HDMI connection then you can connect to nearly any non-HDMI receiver or amplifier with compatible inputs via an optical audio cable or RCA connectors.
A good audio extractor is about only $25-$50 and can even support 5.1 support sound for home theater systems that can have the feature. Note that the HDMI cable is often separate, but those cost just a few dollars.
NOTE: Although connecting an RCA cable is easy, for best results (or to take advantage of surround sound) you’ll want to use the optical or coaxial digital jack connection.2. Connecting to a TV’s digital output jacks
If your TV, cable box, or other sound source doesn’t have ARC a second option is to connect to the digital outputs, if provided. There are two reasons to use a digital connection if your receiver supports it instead of analog:
- Better audio quality
- If your TV or other media device supports surround sound, this will allow you to use it (unlike a 2-channel audio connection)
Either an optical or coaxial digital connection will be fine, although a TOSLINK optical cable will avoid electrical interference or ground loops since it will isolate the electrical ground connections. A digital optical cable costs just a few dollars online so it’s affordable, too!
One thing to know is that fiber optic cables can be damaged if bent too much so you’ll need to be careful to avoid kinking them or crushing them in tight spaces. Doing so can damage the internal material, causing them to fail to carry the signal properly.
3. Connecting a TV to a receiver using analog jacks
A third option, this is normally very easy although you may need to turn on audio outputs in the menu on some TVs to get sound.
Simply connect whichever available outputs you have to the auxiliary, DVD, CD etc. inputs on your receiver. This is a great budget option because you can use a cheap RCA cable as it will work fine for good sound.
Tip:some TVs have a headphone size jack in which case you can use a 1/8″ (3.5mm) plug to RCA jack adapter. You can then connect any RCA cable pair between the TV and the AV receiver.
Notes on TVs with digital out jacks (how to get RCA jacks from them)
Digital to analog converters accept a digital signal that can’t be used with powered speakers or an amplifier and convert the digital signal to a stereo output. RCA and/or 3.5mm (1/8″ headphone) jacks are provided.
This is a bit trickier because you’ll have to convert the digital audio signal, not just connect it. You’ll need to pick up a digital to RCA converter. These cost about $18-$25 and usually include a small AC-DC power supply.
Some do or do not include the cables needed to connect to your television (many do include it) so you’ll simply use whichever option you have:the optical (TOSLINK, fiber optic) jack or the coaxial digital jack.
Note: When using your AV receiver to play the TV sound through your receiver’s speakers, be sure to disable or turn off the volume to the internal TV speakers if it has the option. Otherwise, the TV speakers will conflict with your better speakers, resulting in poor &distracting sound. Use only the stereo speakers when possible.Can I listen to my TV in surround sound on a receiver without HDMI?
The short answer is maybe – it depends on two things:
- Your TV must provide a passthrough type (5.1 capable) digital output. Not all TVs do this, sadly.
- The receiver must have a digital input and surround sound 5.1 support.
Unfortunately many televisions usually “downmix” (convert) the 5.1 audio stream to a 2 channel output. In some cases there’s an option in the TV settings to enable a full 5.1 passthrough connection, sometimes called “LPCM.”
However, there’s no guarantee and frustratingly, TV manufacturers don’t always do a good job of making this clear. Generally you can be pretty confident about surround support over HDMI these days but it’s a bit of a gray area.
In some cases you might want to pick up a streaming media device such as an Amazon Firestick or others which do include surround sound output. Any receiver with Dolby Digital or DTS and a digital input can work with those.
Dolby Pro Logic I/II option
One worst-case scenario can help sometimes. If your TV doesn’t offer 5.1 support, you can use the Dolby Pro Logic feature that nearly all receivers with Dolby Digital decoding provide as a backwards compatible feature.
Dolby Pro Logic I/II was one of the first surround formats and only requires a 2-channel signal source. It can also simulate surround sound from any 2-channel movie or music, meaning you can take advantage of your surround sound system speakers. It’s an option worth trying out.
More related articles
- What is a wireless TV speaker and how do they work?
- Find out more info &tips about connecting a speaker set to a TV.
- Want bass? Learn how to connect a subwoofer to a vintage or old receiver.
- Learn how to can connect home theater speakers to a TV as well.